Plumbing services
Gas Line Installation
in the Capital Region, NY
Gas line installation for a new range, dryer, grill, fireplace or generator: we size the pipe to the appliance load, run it to code, pressure-test every joint and quote one flat price after we measure the run. Licensed, insured Capital Region plumbers since 2006.
Licensed & Insured
Family-Owned Since 2006
Same-Day Service
Do any of these sound familiar?
Signs it’s time to call a pro
Most problems give you warning signs — catch one early and you often avoid a bigger repair.
Adding a gas appliance
A new gas range, dryer, or fireplace needs a fresh line run to where it sits.
Capped or dead-end stub
An old capped line or undersized stub won't safely feed a modern appliance.
Converting from electric or oil
Switching to natural gas or propane means new piping sized for the full load.
Gas dryer in a laundry far from the gas
A gas dryer needs its own branch and shutoff, and the laundry area is often a long way from the nearest gas pipe.
Grill, fire pit or standby generator outdoors
Outdoor appliances need a line that runs outside, and a generator can draw a large load that sets the pipe size.
Our work, done right
What’s included in our service
Gas line installation is running new gas pipe from your meter or existing gas piping to an appliance that does not have a line yet: a range or cooktop, dryer, fireplace, grill, fire pit, water heater or standby generator. This page covers new lines and extensions. If an existing line is leaking or corroded, see gas line repair, and if you ever smell gas, get out of the house before you do anything else.
Every gas line install starts with sizing the pipe to your appliance’s BTU load and the distance of the run — an undersized line starves the burner and is a safety hazard. We run black iron or CSST per code, install a properly rated shutoff at the appliance, then pressure-test the line and check every joint with a leak detector before we connect anything. You get a clean, code-compliant line that passes inspection the first time.
The line has to be sized to what it feeds. Adding a tankless water heater or a generator to a line built for a stove can leave the whole house short on gas, so we add up the appliance loads before we cut pipe. Tankless water heater installation can be a reason for an upsized line.
- Expert plumbing technicians
- Same-day service for your urgent needs
- Financing options available
- Fully licensed & insured
- Serving the Capital Region since 2006
What size gas line do I need for a stove, range or dryer?
There is no single size. The pipe is sized to the total gas load of the appliances on it and the length of the run, using the sizing tables in the fuel gas code.
One appliance on a short run
A single range or dryer a short way from existing gas piping can often be served by a modest branch line.
A long run or several appliances
The longer the run, and the more appliances share it, the larger the pipe has to be so the last appliance still gets full pressure.
Natural gas or propane
The two fuels run at different pressures, and an appliance has to be set up for the fuel it will burn. We confirm which one you have before we size anything.
What the line looks like
Gas piping is usually black iron pipe or corrugated stainless steel tubing, often with a yellow jacket, with a shutoff valve near each appliance. Do not try to move or modify it yourself.
More Services
More ways we can help
Water heater
Tankless water heater
Gas line
- Gas Line Repair
- Gas Line Installation
Repiping & water lines
Water treatment
Sump pump
Fixtures
What happens when you call
From your first call to the final cleanup, here’s exactly how we work — no surprises and no upsells.
Call or book online
Tell us the appliance and location — we schedule same-day where possible.
Same day appointments
Need it fixed today? We hold same-day slots for urgent repairs across the Capital Region.
Measure & size the line
We map the run and size the pipe to your appliance's BTU demand.
Install, test & confirm
We run the line, pressure-test for leaks, and verify it before we leave.
How to decide
Repair or replace? How to decide
Tying a new appliance onto an old, undersized, or corroded line is false economy — it can drop pressure across the whole house and won’t pass inspection. We’ll inspect what you have and tell you straight whether we can extend the existing line or whether running a properly sized new line is the safer long-term call.
Straight talk on price
What does it cost?
Gas line installation is flat-rate and quoted up front after we measure the run and confirm the appliance load — never by the hour, and never a surprise on the invoice. Estimates are free, and financing through Acorn Finance is available so a bigger run or full conversion fits your budget.
Local know-how
Gas line installation in the Capital Region
Capital Region homes run the full mix — natural gas in Albany, Troy, and Schenectady, and propane out toward Clifton Park, Saratoga, Nassau, and the well-and-septic territory. We size lines for both fuels, work with older Colonie and Delmar piping, and pull the right local permits so your install passes inspection across the region.
Schedule your gas line installation today
Got a problem that can’t wait? Book online in under a minute.
Real homeowners
What Capital Region homeowners say
Verified Google reviews from Capital Region homeowners.
Plans & Financing
Two ways to avoid the surprise bill
Join our maintenance plan for yearly tune-ups and big savings, or choose flexible financing that fits your budget with quick pre-qualification. Smart options that help protect your home, your time, and your wallet.
Empire Express Club
Best value
Regular care. Real savings. Total peace of mind.
- Annual plumbing inspection
- Priority scheduling
- 15% off every repair
- 2-year warranty on repairs (vs. 1 year)
- 100% satisfaction guarantee
Financing options
Flexible payment plans to fit your budget.
- $0 down for qualified buyers
- Low monthly payments
- Quick pre-qualification, no credit impact
Financed through Acorn Finance · Service Finance
Subject to credit approval. For qualified buyers.
Gas line projects by appliance
Each appliance asks something different of the new line.
Range or cooktop
A kitchen range needs a line to its location, a shutoff valve within reach and a flexible connector rated for gas.
Dryer
A gas dryer needs its own branch and shutoff, plus an exhaust duct to the outdoors. The laundry area is often far from the existing gas.
Fireplace or log set
Gas fireplaces and log sets need a line to the firebox and a shutoff that stays accessible.
Grill, fire pit or generator
Outdoor appliances need a line that runs outside, often buried or run along the wall. A standby generator can draw a large load, which affects pipe size.
Tankless water heater
A tankless unit can need a bigger line than a tank. See tankless water heater installation for how we check that.
What shapes the cost of a new gas line
The quote follows the job, so the details matter more than a general figure.
Distance and route
A longer run costs more than a short one. Whether the line goes through open basement, finished walls or the ground also matters.
Pipe material and size
The pipe type and diameter follow the load of what the line feeds.
Trenching or access
Outdoor lines may need digging. Finished spaces may need access openings.
Permit and inspection
Requirements vary by town, and the estimate states what applies. Financing is available through Acorn Finance; see financing.
Questions we hear
Gas line installation questions, answered
The things Capital Region homeowners ask us most about repair, replacement and cost.
We quote flat-rate up front after measuring the run — free estimate, no surprises.
It depends on the total BTU load of the appliances on that line and how far the pipe runs from the meter. A single range on a short run needs far less than a range, dryer and furnace on a long one. The fuel gas code has sizing tables for this, and we use them for your layout rather than guessing, so the burners get full pressure when everything is on.
Gas work is not a good do-it-yourself project. A bad joint leaks gas, an undersized line starves the burners, and a permit and an inspection are usually required. Hooking a range to a shutoff that is already there is one thing; running new pipe is another. We install the line, pressure-test it and handle the permit where the town requires one.
Yes — Mon–Fri 7:30 AM–6:00 PM we book same-day where the run and parts allow.
Most new gas lines do — we pull the permit and pressure-test so it passes inspection.
Yes, if a gas line can reach the spot. You need the new line and shutoff, a gas model of the appliance (some can be converted, many cannot), and for a dryer an exhaust duct to the outdoors. Because the load is added to what the house already uses, we check the existing pipe size first. The permit and inspection rules for your town are in the written estimate.
We install and extend gas lines for ranges, dryers, water heaters, furnaces, and boilers, plus outdoor additions like grills, fire pits, pool heaters, and standby generators. Whether you’re on natural gas or propane, we size the line correctly so every appliance gets the pressure and volume it needs.
Yes. Natural gas and propane run at different pressures and need different regulators and appliance settings, so we confirm the fuel first and size and test the line for it. If you are switching an appliance from one fuel to the other, say so when you call, because it changes the parts and the setup.
It depends on the length of the run and the route. A short branch to a range in an open basement is a smaller job than a long buried line to a grill or generator, or one that has to go through finished walls. We give the scope and schedule in the written estimate, and we book same-day service within business hours when the schedule allows. Financing is available for larger runs.
The most common warning signs are a rotten-egg or sulfur smell, a faint hissing near the line, or dead patches of grass over a buried run. If you smell gas, leave the house, avoid light switches or open flames, and call your utility’s emergency line first, then call us to locate and repair the leak.
Where we work
Plumbing across New York's Capital Region
Empire State Plumbing serves homeowners across New York’s Capital Region from our Nassau base — including Albany, Schenectady, Troy, Clifton Park, Colonie, Saratoga, Delmar, East Greenbush, Hudson, and Nassau, plus towns throughout all 6 Capital Region counties.
Hours
- Monday – Friday
- 7:30am – 6pm
- Saturday – Sunday
- Closed
Do we come to you?
Not sure we cover your town? Call and we will tell you.
Pick your town
See the full service areaAlbany
Clifton Park
Colonie
Delmar
East Greenbush
Hudson
Nassau
Rensselaer
Saratoga Springs
Schenectady
Schodack
Troy
Book online
Book your service online, same day
Tell us what is going on and when works for you. A real Empire State Plumbing dispatcher confirms your same-day or next-available slot during business hours.
- Same-day serviceOpen slots across all 6 counties
- Upfront, flat pricingApproved before any work starts
- Licensed & insured techsBackground-checked, every time
Request your booking
Takes about 60 seconds
We use your information to respond to your request and for measurement or advertising as described in our Privacy Policy. For a same-day emergency, calling is fastest.